In PCS lockers standard F-type sockets with a flap with IP44 tightness class
are available. The locker is available in two variants: • wall-mounted: 6 or 9
boxes • free-standing: 9 boxes The locker is mounted to the wall using
expansion bolts. Characteristics: • solid design: body made of 0,8 mm thick
steel, doors made of 1,5 mm thick steel; • mounting to the wall with 12x60 mm
expanding bolts • size of each compartment is 141x540x280 mm (height x width x
depth) • perforated ventilation of the locker in the doors and the rear wall •
230V AC 16A sockets of IP44 protection, power cord supplied with „unischuco”
plug (voltage of 100V is not available in countries with „unischuco” plug) •
maximum power: 3680W • equipped with overcurrent fuse • any battery that fits
in the compartment can be stored in the cabinet, with the exception of lead-
acid or other batteries that emit noxious fumes

In PCS lockers standard F-type sockets with a flap with IP44 tightness class
are available. The locker is available in two variants: • wall-mounted: 6 or 9
boxes • free-standing: 9 boxes The locker is mounted to the wall using
expansion bolts. Characteristics: • solid design: body made of 0,8 mm thick
steel, doors made of 1,5 mm thick steel; • mounting to the wall with 12x60 mm
expanding bolts • size of each compartment is 141x540x280 mm (height x width x
depth) • perforated ventilation of the locker in the doors and the rear wall •
230V AC 16A sockets of IP44 protection, power cord supplied with „unischuco”
plug (voltage of 100V is not available in countries with „unischuco” plug) •
maximum power: 3680W • equipped with overcurrent fuse • any battery that fits
in the compartment can be stored in the cabinet, with the exception of lead-
acid or other batteries that emit noxious fumes

In PCS lockers standard F-type sockets with a flap with IP44 tightness class
are available. The locker is available in two variants: • wall-mounted: 6 or 9
boxes • free-standing: 9 boxes The locker is mounted to the wall using
expansion bolts. Characteristics: • solid design: body made of 0,8 mm thick
steel, doors made of 1,5 mm thick steel; • mounting to the wall with 12x60 mm
expanding bolts • size of each compartment is 141x540x280 mm (height x width x
depth) • perforated ventilation of the locker in the doors and the rear wall •
230V AC 16A sockets of IP44 protection, power cord supplied with „unischuco”
plug (voltage of 100V is not available in countries with „unischuco” plug) •
maximum power: 3680W • equipped with overcurrent fuse • any battery that fits
in the compartment can be stored in the cabinet, with the exception of lead-
acid or other batteries that emit noxious fumes

0,6 mm Finish thickness

18 mm Standard MDF panel / black paste

0,6 mm Balancing

Various Mill spacing

19 mm Finished thickness

3000 × 1200 mm Standard dimensions

Epoxy accelerator for accelerating the catalysis of resin products. Can be
used in epoxy resins for underlays and bases of resin floors.

Epoxy accelerator for accelerating the catalysis of resin products. Can be
used in epoxy resins for underlays and bases of resin floors.

Specific detergent for floor cleaning with floor washer-dryers. It prevents
the formation of foam on the floor, making it easier to clean and rinse away
the detergent.

Light and dark gray quartz, used for our ceramic-coated multilayer finish.
Suitable for industries, storage and logistics warehouses, mechanical
workshops, industrial activities with heavy forklift and vehicle traffic,
warehouses, and indoor parking lots.

Specific detergent for floor cleaning with floor washer-dryers. It prevents
the formation of foam on the floor, making it easier to clean and rinse away
the detergent.

A neutral, three-component, water-based epoxy resin product specifically
formulated as an adhesion primer on damp substrates. It can be used to limit
and dissipate the action of rising damp.

A neutral, three-component, water-based epoxy resin product specifically
formulated as an adhesion primer on damp substrates. It can be used to limit
and dissipate the action of rising damp.

A neutral, three-component, water-based epoxy resin product specifically
formulated as an adhesion primer on damp substrates. It can be used to limit
and dissipate the action of rising damp.

Light and dark gray quartz, used for our ceramic-coated multilayer finish.
Suitable for industries, storage and logistics warehouses, mechanical
workshops, industrial activities with heavy forklift and vehicle traffic,
warehouses, and indoor parking lots.

Specific detergent for the maintenance and cleaning of heavily soiled surfaces
stained with oil, grease, and glue, such as metalworking industries,
workshops, paint shops, etc.

Specific detergent for the maintenance and cleaning of heavily soiled surfaces
stained with oil, grease, and glue, such as metalworking industries,
workshops, paint shops, etc.

Light and dark gray quartz, used for our ceramic-coated multilayer finish.
Suitable for industries, storage and logistics warehouses, mechanical
workshops, industrial activities with heavy forklift and vehicle traffic,
warehouses, and indoor parking lots.

Light and dark gray quartz, used for our ceramic-coated multilayer finish.
Suitable for industries, storage and logistics warehouses, mechanical
workshops, industrial activities with heavy forklift and vehicle traffic,
warehouses, and indoor parking lots.

Two-component, pigmented epoxy resin product.
Recommended for finishing on bathtubs/sandwich panels.

Two-component, pigmented epoxy resin product.
Recommended for finishing on bathtubs/sandwich panels.

Two-component epoxy resin product pigmented suitable as a primer can be
pigmented when working with RG COAT 50

Two-component, pigmented epoxy resin product.
Recommended for finishing on bathtubs/sandwich panels.

Two-component cementitious skim coat product premixed, fiber-reinforced, based
on cement and hydraulic binder, selected aggregates and additives

Two-component, fiber-reinforced, water-based cementitious product for
decorative, concrete-like effects.
Used only for interiors, walls, furniture, and floors. Suitable for high-wear
environments.

Two-component, fiber-reinforced, water-based cementitious product for
decorative, concrete-like effects.
Used only for interiors, walls, furniture, and floors. Suitable for high-wear
environments.

Two-component, water-based resin product pigmentable for monochromatic
decorative effects. Used for both interiors and exteriors, on both floors and
walls. Suitable for high-traffic environments.

Two-component, water-based resin product pigmentable for monochromatic
decorative effects. Used for both interiors and exteriors, on both floors and
walls. Suitable for high-traffic environments.

Two-component, water-based resin product pigmentable for decorative cloudy
effects.
Used for both interiors and exteriors, on both floors and walls. Suitable for
environments subject to high levels of wear.