MSW heavy workshop cabinets MSW is a family of heavy workshop cabinets
designed for storing tools and workshop accessories. The MSW heavy workshop
cabinets are engineered to withstand the toughest conditions. They feature a
welded monolithic construction, significantly enhancing structural strength.
The cabinet body can withstand a load of up to 700 kg. Body and doors made of
1 mm thick steel. The load capacity of the shelves is up to 100 kg.

6 galvanized shelves \+ 2 blocks of 6 drawer units

MSW heavy workshop cabinets MSW is a family of heavy workshop cabinets
designed for storing tools and workshop accessories. The MSW heavy workshop
cabinets are engineered to withstand the toughest conditions. They feature a
welded monolithic construction, significantly enhancing structural strength.
The cabinet body can withstand a load of up to 700 kg. Body and doors made of
1 mm thick steel. The load capacity of the shelves is up to 100 kg.

4 galvanized shelves \+ right side with 14 drawer units: 12 zwykłych i 2 high
with storage compartment

## **Materigi**

The Materigi system has been developed for the decoration of floors and
interior walls in residential and commercial settings. It can be applied over
an existing support of concrete, sand cement, or tiles, avoiding demolition
work.

## **Features**

The Materigi decorative resin coating is slip-resistant, dust-proof,
waterproof, and decontaminable. Materigi also has significant abrasion
resistance. It is suitable for offices, private homes, showrooms, and
commercial areas.


## **Exemplary Cycle**

0.Existing support

1.Adhesion primer

2.Smoothing with epoxy resin and dusting of neutral quartz

3.Materigi

4.Materigi

5.Single-component colored polyurethane gel spread with a trowel

6.Water-based transparent polyurethane finish applied with a roller

Single glass door with lock.

Body made of 0,7 – 1,0 mm thick steel. Wing doors filled with 4 mm thick
tempered glass, Shelves adjustable every 25 mm available in two variants: made
of tempered glass, thickness 5 mm and metal thickness. 0.7mm. Door handle with
a security lock that locks the door at two points.

Single glass door with lock.

Double glass doors with lock with 4 metal shelves (adjustable every 25 mm)

Body made of 0,7 – 1,0 mm thick steel. Wing doors filled with 4 mm thick
tempered glass, Shelves adjustable every 25 mm available in two variants: made
of tempered glass, thickness 5 mm and metal thickness. 0.7mm. Door handle with
a security lock that locks the door at two points.

Double glass doors with lock.

Single glass door with lock.

NSUM extensions are dedicated equipment for Malow social wardrobes. Extensions
can be added to existing structures. NSUM extensions provide additional
storage space in the same area. NSum extensions arem ode of 0,5-0,6 mm thick
steel. The doors are reinforced, have ventilation holes and are closed with
cylinder 1-pt lock.

NSUM extensions are dedicated equipment for Malow social wardrobes. Extensions
can be added to existing structures. NSUM extensions provide additional
storage space in the same area. NSum extensions arem ode of 0,5-0,6 mm thick
steel. The doors are reinforced, have ventilation holes and are closed with
cylinder 1-pt lock.

NSUM extensions are dedicated equipment for Malow social wardrobes. Extensions
can be added to existing structures. NSUM extensions provide additional
storage space in the same area. NSum extensions arem ode of 0,5-0,6 mm thick
steel. The doors are reinforced, have ventilation holes and are closed with
cylinder 1-pt lock.

NSUM extensions are dedicated equipment for Malow social wardrobes. Extensions
can be added to existing structures. NSUM extensions provide additional
storage space in the same area. NSum extensions arem ode of 0,5-0,6 mm thick
steel. The doors are reinforced, have ventilation holes and are closed with
cylinder 1-pt lock.

NSUM extensions are dedicated equipment for Malow social wardrobes. Extensions
can be added to existing structures. NSUM extensions provide additional
storage space in the same area. NSum extensions arem ode of 0,5-0,6 mm thick
steel. The doors are reinforced, have ventilation holes and are closed with
cylinder 1-pt lock.

NSUM extensions are dedicated equipment for Malow social wardrobes. Extensions
can be added to existing structures. NSUM extensions provide additional
storage space in the same area. NSum extensions arem ode of 0,5-0,6 mm thick
steel. The doors are reinforced, have ventilation holes and are closed with
cylinder 1-pt lock.

NSUM extensions are dedicated equipment for Malow social wardrobes. Extensions
can be added to existing structures. NSUM extensions provide additional
storage space in the same area. NSum extensions arem ode of 0,5-0,6 mm thick
steel. The doors are reinforced, have ventilation holes and are closed with
cylinder 1-pt lock.

Body made of 1,0 mm thick steel, drawers made of 0,8-1,0 mm thick steel.
Drawers on ball bearing slides with double extensions, protected against
falling out, equipped with pull-out block. Central lock. 50 kg load capacity
of drawers. 86% drawer extension.

Body made of 1,0 mm thick steel, drawers made of 0,8-1,0 mm thick steel.
Drawers on ball bearing slides with double extensions, protected against
falling out, equipped with pull-out block. Central lock. 50 kg load capacity
of drawers. 86% drawer extension.

Body made of 1,0 mm thick steel, drawers made of 0,8-1,0 mm thick steel.
Drawers on ball bearing slides with double extensions, protected against
falling out, equipped with pull-out block. Central lock. 50 kg load capacity
of drawers. 86% drawer extension.

Body made of 1,0 mm thick steel, drawers made of 0,8-1,0 mm thick steel.
Drawers on ball bearing slides with double extensions, protected against
falling out, equipped with pull-out block. Central lock. 50 kg load capacity
of drawers. 86% drawer extension.

Body made of 1,0 mm thick steel, drawers made of 0,8-1,0 mm thick steel.
Drawers on ball bearing slides with double extensions, protected against
falling out, equipped with pull-out block. Central lock. 50 kg load capacity
of drawers. 86% drawer extension.

Body made of 1,0 mm thick steel, drawers made of 0,8-1,0 mm thick steel.
Drawers on ball bearing slides with double extensions, protected against
falling out, equipped with pull-out block. Central lock. 50 kg load capacity
of drawers. 86% drawer extension.

Body made of 1,0 mm thick steel, drawers made of 0,8-1,0 mm thick steel.
Drawers on ball bearing slides with double extensions, protected against
falling out, equipped with pull-out block. Central lock. 50 kg load capacity
of drawers. 86% drawer extension.

In PCS lockers standard F-type sockets with a flap with IP44 tightness class
are available. The locker is available in two variants: • wall-mounted: 6 or 9
boxes • free-standing: 9 boxes The locker is mounted to the wall using
expansion bolts. Characteristics: • solid design: body made of 0,8 mm thick
steel, doors made of 1,5 mm thick steel; • mounting to the wall with 12x60 mm
expanding bolts • size of each compartment is 141x540x280 mm (height x width x
depth) • perforated ventilation of the locker in the doors and the rear wall •
230V AC 16A sockets of IP44 protection, power cord supplied with „unischuco”
plug (voltage of 100V is not available in countries with „unischuco” plug) •
maximum power: 3680W • equipped with overcurrent fuse • any battery that fits
in the compartment can be stored in the cabinet, with the exception of lead-
acid or other batteries that emit noxious fumes

In PCS lockers standard F-type sockets with a flap with IP44 tightness class
are available. The locker is available in two variants: • wall-mounted: 6 or 9
boxes • free-standing: 9 boxes The locker is mounted to the wall using
expansion bolts. Characteristics: • solid design: body made of 0,8 mm thick
steel, doors made of 1,5 mm thick steel; • mounting to the wall with 12x60 mm
expanding bolts • size of each compartment is 141x540x280 mm (height x width x
depth) • perforated ventilation of the locker in the doors and the rear wall •
230V AC 16A sockets of IP44 protection, power cord supplied with „unischuco”
plug (voltage of 100V is not available in countries with „unischuco” plug) •
maximum power: 3680W • equipped with overcurrent fuse • any battery that fits
in the compartment can be stored in the cabinet, with the exception of lead-
acid or other batteries that emit noxious fumes

In PCS lockers standard F-type sockets with a flap with IP44 tightness class
are available. The locker is available in two variants: • wall-mounted: 6 or 9
boxes • free-standing: 9 boxes The locker is mounted to the wall using
expansion bolts. Characteristics: • solid design: body made of 0,8 mm thick
steel, doors made of 1,5 mm thick steel; • mounting to the wall with 12x60 mm
expanding bolts • size of each compartment is 141x540x280 mm (height x width x
depth) • perforated ventilation of the locker in the doors and the rear wall •
230V AC 16A sockets of IP44 protection, power cord supplied with „unischuco”
plug (voltage of 100V is not available in countries with „unischuco” plug) •
maximum power: 3680W • equipped with overcurrent fuse • any battery that fits
in the compartment can be stored in the cabinet, with the exception of lead-
acid or other batteries that emit noxious fumes

The PINWHEEL 02 handle is the larger and more expressive model in the
collection. Its design is based on a windmill-inspired arm arrangement,
emphasizing the geometric and modern character of the fronts. The handle is
made of high-quality powder-coated steel, ensuring durability and comfort of
use. The PINWHEEL 02 complements the smaller PINWHEEL 01 model, allowing for
the creation of cohesive and diverse combinations.

The final appearance of the handle corresponds to the technical drawing.

0,6 mm Finish thickness

18 mm Standard MDF panel / black paste

0,6 mm Balancing

Various Mill spacing

19 mm Finished thickness

3000 × 1200 mm Standard dimensions

Epoxy accelerator for accelerating the catalysis of resin products. Can be
used in epoxy resins for underlays and bases of resin floors.

Epoxy accelerator for accelerating the catalysis of resin products. Can be
used in epoxy resins for underlays and bases of resin floors.

Specific detergent for floor cleaning with floor washer-dryers. It prevents
the formation of foam on the floor, making it easier to clean and rinse away
the detergent.

Light and dark gray quartz, used for our ceramic-coated multilayer finish.
Suitable for industries, storage and logistics warehouses, mechanical
workshops, industrial activities with heavy forklift and vehicle traffic,
warehouses, and indoor parking lots.

Specific detergent for floor cleaning with floor washer-dryers. It prevents
the formation of foam on the floor, making it easier to clean and rinse away
the detergent.